Network Settings; Network Selection - LG V9000 Benutzerhandbuch

Settings
2. Connect the headset according to the procedures
described in the Pairing Devices section.
3. To use the headset, select the headset from the
registered devices, press the Option key and then
select 2. Connect.
4. To check that the selected headset has been
connected successfully, press the Option key. If it
is properly connected, 2. Disconnect will appear. If
it is not connected, 2. Connect will appear.
<Connecting a handsfree kit>
1. Menu ¡ 9. Settings ¡ 7. Connectivity ¡
1. Bluetooth
2. Connect the handsfree kit according to the
procedures described in the Pairing Devices
section.
3. To use the handsfree kit, select the handsfree kit
from the registered devices, press the Option key
and then select 2. Connect.
4. To check that the selected handsfree kit has been
connected successfully, press the Option key. If it
is properly connected, 2. Disconnect will appear. If
it is not connected, 2. Connect will appear.
98

Network settings

[Menu 9-7-2]

Network selection

1. You can select either Automatic or Manual
network selection.
2. If you select Automatic, connection continues
according to the Automatic network selection
procedures. This setting is recommended for best
service and quality.
3. If you select Manual, all the currently 2G (GSM)
and 3G (UMTS) available networks are shown, and
you can select one of them for registration. If the
registration of the network has failed, then all the
currently available networks are listed again, and
you can select any other one for registration.
Preferred lists
1. Select Preferred lists to display the preferred list
saved in the current SIM card.
2. You can edit and save a preferred list in the SIM
card by selecting the menu when the preferred list
is displayed.