Product Description - Hama Rc 540 Bedienungsanleitung

Operating instruction
Thank you for your purchase of this delicate
Radio Controlled clock. The utmost care
has gone into the design and manufacture
of your clock. Please read the instructions
carefully and keep the manual well for
future reference.
GETTING STARTED
. Remove the battery door.
2. Install two new AAA size batteries as per
the polarity information marked on the
battery compartment.
. Replace the battery door.
. Once the battery is installed, the normal
segments of the LCD will be shown
before entering the radio controlled time
reception mode.
‚ When insert battery, the RC clock will
display at 2:00am and start synchronize
the radio controlled time signal in 8
seconds.
—
B со
сл
Note: If no display appears on the LCD after
inserting the battery, press the "RESET" key
by using a metal wire. In some cases, you
may not receive the signal immediately. Due
to the atmospheric disturbance, the best
reception often occurs during nighttime.
FUNCTION KEYS
CLOCK key:
- In normal time mode,press and hold it for
2 seconds to enter normal time setting
mode.
- In setting mode, press it to step the
setting items.or press and hold it for 2
seconds to save the setting and return to
normal time mode.
ALARM key:
In normal time mode,press and hold it
Sh 2 seconds to enter alarm time setting
mode.
- In setting mode, press it to step the
setting items.
- After setting, press it again to save the
setting values.
DOWN key:
- In setting mode, press it to decrease the
setting value.
- Press it without releasing to speed up the
setting.
10
00113965man cs de en es fr hu it nl pl ru sk.indd 10-11
UP key:
- In setting mode, press it to increase the
setting value.
- Press it without releasing to speed up the
setting.
ALARM ON / OFF slide switch:
- Slide it to ON position to turn on alarm
function.
- Slide it to OFF position to turn off alarm
function.
ee er key:
Press itto turn on and keep the backlight
for 5 seconds.
- When the unit is sounding,press it to
stop the current alarm and enter snooze
mode.
NIGHT-LIGHT ON/OFF slide switch:
- Slide itto "ON" position to activate
night-light function. When it is "ON" the
backlight will automatically turn on in dim
& dark environment detected by the light
sensor.
- The brightness of night-light is weaker
than normal backlight.
- Slide itto "OFF" position to turn off the
night-light function.
RCC key:
Press it to switch between Celsius and
Fahrenheit.
- Press and hold it for 3 seconds for
manual receiving RC signal or reception
testing.
RESET key:
In case of mal-function, press "RESET" key
by using a metal wire to reset all values.
1L. +7
LE 20N: „JE = ] |
2å -6 THU 236;
PRODUCT DESCRIPTION
1. LCD display
2. CLOCK key
3. ALARM key
4. DOWN key
11
15.01.13 08:07