Dreame Bot Z10Pro Benutzerhandbuch Seite 16

How to Use
Use the Mopping Function
It is recommended that all floors are vacuumed at least three times before first mopping
session to achieve a better cleaning effect.
1. Dampen the mop pad and wiring out excess water. Insert the mop pad into the slot
of the water tank as shown in the figure, and paste the pad firmly.
2. Open the water tank lid, fill the tank with water, then securely close the lid.
3. Align the mopping module as indicated by the arrow, then slide it into the back of
the robot until it clicks into place. Press the button
Home app to start cleaning.
Note:

It is not recommended to use the mopping function on carpets.

Use the app to adjust the water flow as required.
4. Press the two side clips inwards and slide the water tank backwards to separate it
from the robot.
or use the Mi Home/Xiaomi
16