Dreame Bot Z10Pro Benutzerhandbuch Seite 12

Install the side brush
Note: Install the side brush until it clicks into place.
Connect to a power outlet and start charging
Place the base on level ground against the wall and connect it to a power outlet. Place the
robot onto the base to charge. The robot will turn on automatically and begin charging. It
is recommended to fully charge your robot before first-time use.
Place the base within the
best Wi-Fi range
Note

Keep the immediate area 1.5m in front of the base and 0.5m to its both sides clear
of objects.

Make sure that no objects might block the signalling area.
Put away the power cord
into the cord storage slot
12