Programmed Play - AEG MC 4458 iP Bedienungsanleitung

English
40
Press three times = This plays the song before etc. If the
button is kept pressed down, the ma-
chine starts to search through the tracks.
(The sound is thereby set to mute.)
STOP (6/9)
The music playback is stopped. If an audio CD is inserted,
the overall number of songs and the playback time of the
CD are now displayed. In case of an MP3 CD or USB storage
medium, the number of folders and the overall number of
songs will be displayed.
In Radio mode:
Press this button to start automatic station scanning. Impor-
tant: The stations that you stored previously are overwritten.
REPEAT (15 on the remote control)
In case of a playing Audio CD:
Press once = (REP emits a fixed light) the current track
is repeated continuously.
Press twice = (REP ALL all emits a fixed light) the
whole CD is played continuously.
Press three times = All functions are cancelled. The normal
play mode is resumed.
Only with MP3 music playback:
Press once = The current track is repeated continu-
ously REP appears in the display). (
Press twice = The current folder of the MP3 CD or of
the USB storage medium is repeated
continuously (REP ALB Appears in the
display). You can select the individual
folders with the buttons ALB+ and ALB-
(4/20 on the remote control).
Press three times = The whole CD is played continuously
( REP ALL appears in the display).
Press four times = The function is deactivated and the CD
is played in the normal mode.
RANDOM (10 on the remote control)
The display contains the word RND and the track number
that is to be played first. All tracks are played back in random
order.
INTRO (16 on the remote control)
(The display shows INTRO) Each title of the CD is played for
10 seconds.
ALB+ or ALB- (4/20 on the remote control)
Press these buttons during playback to select the next folder
up or down. If this button is pressed in stop mode the display
also appears briefly. Then start playback with the
(7/7).
10+ (3 on the remote control)
Serve for direct entry of a title number or radio storage space.
• Press the button once to be able to enter a two-digit
number with the numerical keys. The following appears
on the display "_ _"
• If more than 99 titles are located on the MP3 CD or on
the USB storage medium, press the button twice. The
three-digit entry prompt appears on the display "_ _ _".
PROG/MENU (21 on the remote control)
• Serves for the programming of a playback sequence dur-
ing CD/USB operation.
• Press this button in IPOD mode to return to the previous
menu.
NOTE:
The Music app must already have been started for this.
ENTER (19 on the remote control)
In IPOD mode:
Press this button to activate a function or to display the next
menu.
/ (5 on the remote control)
In IPOD mode:
Press this button to browse the iPod/iPhone menu upwards
or downwards.
MEMORY/VIDEO SELECT (12 on the remote control)
• To set the time of day during standby.
• Serves to turn the VIDEO OUT connection on and off on
the rear of the device.
On = The video signal is output at the connection.
Off = The video signal is only reproduced on the at-
tached iPod/iPhone.

Programmed Play

This can be used to program any desired sequence of tracks.
(Only for CD/USB operation)
1. Press the STOP/AUTO button (6/9).
2. Press the PROG/MENU button (21 on the remote
control). The notification "P01" (memory space) appears
on the display and the title "00" or "000" at MP3 CD' s /
data file is blinking. Use the
remote control) to select the desired track and then press
the PROG/MENU button again. The display changes to
memory slot P02.
NOTE:
• You can also directly enter the titles. Press the 10+
button (3 on the remote control) instead of the
button
/
the numerical keys on the remote control.
buttons (5 on the
/
buttons and enter the desired title with