Zodiac ei Serie Montage- Und Gebrauchsanleitung Seite 25

4.2 Language selection
The default language for your Ei is French. However the appliance is capable of displaying most
messages in the following languages: French, English, Spanish, Italian, German, Dutch and Afrikaner.
To select your language:
1. Switch on the Ei.
2. Wait for the completion of the initial boot sequence on the LCD screen (About 5 seconds).
3. Press and maintain pressed down the
After about 5 seconds the current language will be displayed on the screen.
4. Maintain the
5. Release the
display messages on the LCD.
4.3 Setting the clock (clock) 4.3 Setting the clock (clock) 4.3 Setting the clock (clock)
!
IMPORTANT REMARK: Your Ei Zodiac chlorinator is equipped with an internal memory. During
the fi rst Ei electrical connection (Or upon re-initializing) it is important to leave the power on for at
least 24 hours uninterrupted (permanent power supply or forced operation). This will ensure that the
internal accumulator will be suffi ciently charged to store in memory all the operating parameters.
1. Turn power on.
2. Wait until the successful completion of the initialization sequence on the LCD screen (About 5 seconds).
3. Press down and maintain down the
4. While maintaining the
the desired hours value. (The
5. While maintaining the
until you reach the adjustment wanted. (The
incrementation).
6. Release the
NOTE: The clock uses a 24 hours display format.
Resetting the appliance:
1. When on the default LCD display press the
2. After a few seconds the Ei device restarts and the clock is reset ('00:00').
3. Set the clock time using the procedure described above (Setting the time).
!
WARNING: The reinitialisation of the appliance causes the loss of all previous settings (clock,
programmer...)!
26
key pressed down until the desired language is displayed on the LCD screen.
key when the desired language is displayed. It will now be the language used to
key.
key pressed, press the
key can be maintained pressed to accelerate the incrementation).
key pressed, press down the
key - the correct time has now been set on the clock.
key.
key, in order to set the hours, until you reach
key, in order to set the minutes,
key can be maintained pressed to accelerate the
key.