Technical Support - PEAKnx Control 12 Kurzanleitung

Software
The panel can be operated both with the supplied YOUVI software and with other Windows-
compatible software.
Tip: After commissioning and setting up the panel, we recommend that you create a backup


using the optionally available recovery stick from PEAKnx.
Operating system
The operating system used is Microsoft Windows 10 IoT Enterprise. Other drivers and programs
for the visualisation of building information and for building control can be installed later.
Note: PEAKnx provides no service and no warranty for software products from other


companies and in case of OS driver updates.
YOUVI Software package
The YOUVI Basic visualisation software included in the scope of delivery is used to control
KNX devices such as sockets, switches, lights, dimmers, RGB lights, heaters, blinds or shutters.
Thanks to the IP router included in the software package, the panel can run YOUVI's vvisualisa-
tion without an external server or additional bus coupler. Only the connection to the IP network
and the KNX bus (via the integrated KNX connection on the panel) is necessary.
Setting up the visualisation
After commissioning, set up the visualisation as described in the enclosed quick start quide. It is
assumed that all KNX actuators have already been parameterised via the ETS.

Technical support

If you experience problems with your Control 12, please contact our PEAKnx Support Team:
▪ Mail: support@peaknx.com
Create a Support Ticket: https://helpdesk.peaknx.com/
▪
▪ Phone: +49-6151-279 1825
Software
23