INVENTOR K2VI32-09WFI Benutzerhandbuch Seite 12

Step 4: Plug in the air
conditioner to the power
supply and turn it on. Set the
air conditioner to Cooling
Mode, Low Fan Speed and
30°C Temperature. The
indication on the display of
the air conditioner will start
blinking. Press Confirm to
proceed.
Step 7: Allow a few moments
for the pairing process to
complete.
Reminder: The process should be completed within 3 minutes. If it is not, please repeat the process.
12
Step 5: Press "Go to
Connect" to enter your
device's WiFi Networks.
Step 8: When the pairing is
completed if you wish, you
may rename your device.
Press "Done" when ready.
Step 6: From your mobile
device settings, connect
to the air conditioner's
network "U-AC-XXXX".
Return to the app and
press "Confirm hot spot
connection, next" to start
the pairing process.
You are all set.
EN