FreeX X-ONE Betriebsanleitung Seite 71

Folding of bag 2
The manufacturer has set all line and riser lengths of the X-ONE
with high precision to the tested measurements as standard. In a
multi-phased process for securing quality every paraglider is
rechecked individually before leaving the manufacturer.
Therefore, there is no need for readjustment or fine trimming.
Your X-ONE has been set optimally regarding flight
performance, handling and safety.
Any arbitrary alteration of line lengths or risers will result in the
expiry of any responsibility of the manufacturers or distributors!
Exceptions to this are a djustments of brake position and speed
system.
The brake line adjustments of the X-ONE at the time of its serial
dispatch are the medium position.
71