Sony Super Trinitron KV-S 2941 D Bedienungsanleitung Seite 45

Note:
The modifications
made in »User« will
be stored. All other
settings are reset to
the factory-set level
when you change to
another mode.
TIMER
To go back to the
normal TV picture
Press MENU.
To switch off the
timer
Select »OFF« in
step 4.
To check the remain-
ing time
Press @.
44
Graphic Equalizer
Using this function you can individually adjust the sound by cut-
ting and boosting selected frequencies. You can also select bet-
ween the following modes:
Flat-> Pop — Rock — Jazz -> Vocal User
Select »Sound control« in the Main Menu, then select »Graphic
equalizer« using A + or V — and press OK.
Press OK. The colour of »Mode« changes. (See Fig. 34.) Select
the desired mode with A + or V —, then press OK.
If you want to modify a mode, select the desired bar of a fre-
quency band using A + or V — and press OK. The selected bar
changes colour. Using A + or V — adjust the level of frequency
and press OK. tn this way you can adjust all 5 graphic bars.
Press MENU to return to the normal TV mode.
Using Programme Catching
Using A + or V — select »Programme Catching« from the Main
Menu and press OK. Now a scan of 9 successive programmes
(8 still pictures, 1 live picture where the cursor is positioned) is
displayed on the TV screen starting from the programme tuned
in. Using A + or V — you can move the cursor and update the still
pictures. The programme scanning starts again if you select the
programme position lower or higher than the 9 displayed ones.
(See Fig. 35.)
press OK. Now the selected programme is displayed and you
are back in the normal TV mode. (See also page 46)
[PROGRAMME CATCHING]
Fi a PR
Using the Sleep Timer
>» Sleep Timer (off)
You can select a time period after which the TV automatically
switches into standby mode.
Using A + or V — select »Timer« and press OK.
The TIMER menu appears. (See Fig. 36.)
Press OK.
_ The time period option changes colour.
Select the time period with A + or V -.
The time period (in minutes) changes as follows:
10-20-30 40 50- 60 70 80 > 90
OFF ——
After selecting the time period, press OK.
The cursor moves back to the left margin and the timer starts
counting.
One minute before the TV switches into standby mode, a
message is displayed on the screen.