Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Watching the TV
If no picture appears
when you depress ©
on the TV
and if the standby
indicator on the TV is
lit, the TV is in
standby mode. Press
© or one of the num-
ber buttons to switch
it on.
This section explains the basic functions you use while
watching TV. Most of the operations can be done using the
simple side of the Remote Commander.
Switching the TV on and off
Switching on
Depress © on the TV.
Switching off temporarily
Press © on the Remote Commander.
The TV enters standby mode and the standby indicator on the
front of the TV lights up.
To switch on again
Press CO, PROGR +/-, or one of the number buttons on the
Remote Commander.
Switching off completely
Depress © on the TV.
Selecting TV Programmes
Press PROGR +/- or press number buttons.
To select a double-digit number
Press -/- -, then the numbers.
For example, if you want to choose 23, press -/--, 2 and 3.
Adjusting the Volume
Press 44 +/-.
Operating the TV Using the
Buttons on the TV
With the buttons on the TV, you can select programmes, adjust
the volume, and select video input sources.
Press P-+.<1-—+ ©) button repeatedly until the programme
EE eer |
number, 44 (for volume), or © (for video input picture) appears.
Then adjust with the —/+ buttons.
Press —/+ buttons to switch on the TV from the standby mode.
Press —/+ simultaneously to reset picture and sound controls to
the factory preset level (RESET function).
41
Werbung
