Mounting; Installation With Wall Mounting Bracket - HomeMatic IP HmIP-SMI Montage- Und Bedienungsanleitung

5

Mounting

Due to the supplied stand (D) and the wall mounting
bracket (E) you can mount the motion detector anywhere
in the room.
If you want to place the motion detector e.g. on a shelf
or cabinet you can use the already fixed stand (D) and
place the device at the desired location after you have put
the device into operation (see sec. „6 Start-up" on page
36).
If you want to mount the device to a wall, please proceed
as described in the next section.
5.1

Installation with wall mounting bracket

The installation of the motion detector on a wall or in a
corner is simple and easy with the supplied wall mount-
ing bracket (E).
You can install the motion detector
• with the supplied screws and plugs or
• with the supplied adhesive strips.
.
Mounting
33