Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Standby mode
• When the KLOUD is started, the blue LED flashes
KLOUD is ready to be used. If no further button is pressed, the »standby mode«
automatically starts after 5 minutes.
• The „standby mode" requires very little battery. Therefore, with a fully charged
KLOUD , the battery will last up to 3 weeks in »standby mode«.
• If the »on-off button«
• If the »start-stop button«
»standby mode«. The blue LED flashes
• To activate the device from »standby mode«, press the »start-stop key«
1 second and the device is immediately ready for use.
• Since all LEDs are switched off during »standby mode«, it is not possible to see
Powered by
13
for approx. 15 seconds and the
Powered by
is turned off, the device is NOT in »standby mode«.
is pressed for 3 seconds, the device switches to
during shutdown and then switches off.
Powered by
Powered by
whether there is still enough battery for an application. To check the battery
status, switch the »on-off switch«
off and then on again. If the blue LED
flashes, the device boots up and is ready for use again after 15 seconds.
Otherwise please charge the battery.
• During »standby mode«, you cannot connect the app to the applicator.
Key Combinations at a Glance
Start program
Set the on-off switch to „I"
Select the desired program with
the program selection button
Press the start-stop button once
for
Do-not-disturb Mode
Hold the program selection button
Powered by
and the start-stop button
simultaneously.
Now, only the "ON" LED is on.
Magnetic field intensity
Standby mode
Start program
Hold the start-stop button for
three seconds
Hold the start-stop button for
2 seconds to see the intensity level
Or: Do not press any button for
5 minutes (Exception: program
While holding the start-stop button,
is running)
select the desired intensity with
the program selection button.
Deactivate WiFi in the app
Check battery level
Open the App on your smartphone >
Menu > Settings > WiFi configurations >
Hold the program selection
Turn on the WiFi toggle key > Enter WiFi
button for 3 seconds
name and password > Connect > Pair.
Activate Bluetooth
Press the Bluetooth button once
14
Werbung
