Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.15 App connection
The device data can be transferred to the Dräger add app
automatically via Bluetooth.
After initial pairing, the Dräger add app connects to the device
automatically and downloads the data. The data are displayed there
as a list, in a ring graphic and also on a map if GPS is activated. Other
data can be added in addition to the measurement results.
For initial pairing:
1. Install the Dräger add app by following the instructions on the
screen.
2. Choose the device in the app.
3. Choose Bluetooth in the device menu.
4. Select Bluetooth and choose Pair with app.
5. Confirm the connection in the app.
6. Compare the code on both devices and confirm.
5
Troubleshooting
An error message is displayed in the event of a device malfunction.
The number below the message is for service purposes. If the error
persists even after turning the device off and on multiple times,
contact authorized personnel, such as DrägerService.
Error/Message
Device does not turn
on.
Insufficient volume of
breath/
invalid sample.
®
Dräger Alcotest
Cause
(Rechargeable) bat-
teries are empty.
Subject is not blow-
ing for long enough or
intermittently.
7000
Troubleshooting
Remedy
Charge the recharge-
able battery or replace
the batteries.
Blow more strongly
and without interrup-
tion into the mouth-
piece/funnel.
If necessary, take a
manual or passive
breath sample.
|
en
47
Werbung
