Beurer MN4X Gebrauchsanweisung Seite 17

5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Stainless steel blade with titanium
1
coating
2 comb attachments (3-7/8-12 mm)
2
2-level precision adjustment: 0.8 and
3
1.2 mm
ON/OFF control
4
LED display with battery status in %
5
and charge display
Connection socket
6
Storage bag
7
USB charging cable
8
Cutting oil
9
Cleaning brush
10
6. INITIAL USE
You can operate the device with
the battery as well as a mains
adaptor (not included in delivery).
To charge the device, only use a
protection class 2 mains adaptor
( ), which is approved for use
with household appliances and
whose output corresponds to the
safety extra-low voltages of 5 V
and max. 1 A.
6.1 Battery operation/charging
the battery
You must fully charge the battery for 90 min-
utes before the first use. The operating period
of the device is approx. 90 minutes when it is
fully charged.
If the battery charge level is less than 20%,
the LED display will show
and flash.
"Lo" for "Low"
5
1. Connect the USB charging cable
connection socket
(not included in delivery).
2. Insert the mains adaptor into a suitable
socket. The LED display
current battery status in % and the charge
display flashes.
3. As soon as the LED display
"100%" and the charging symbol is per-
manently illuminated, the battery is fully
charged. The device is now ready for use.
6.2 Mains operation
 DANGER
Risk of electric shock! Never use the device
in the shower or in a damp environment
when it is being operated via the mains!
1. Connect the USB charging cable
connection socket
(not included in delivery).
2. Insert the mains adaptor into a suitable
socket. The device is now ready for use
and the battery is charging.
17
to the
8
and a mains adaptor
6
shows the
5
shows
5
to the
8
and a mains adaptor
6