Herunterladen Diese Seite drucken

Toro Revolution 60V Bedienungsanleitung Seite 6

Rucksack
Vorschau ausblenden Andere Handbücher für Revolution 60V:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
5.
If the supply cord to the battery charger is
damaged, contact an Authorized Service Dealer
to replace it.
6.
Charge the battery pack with only the battery
charger specified by Toro. A charger suitable for
1 type of battery pack may create a risk of fire
when used with another battery pack.
7.
Charge the battery pack in a well-ventilated area
only.
8.
Follow all charging instructions and do
not charge the battery pack outside of the
temperature range specified in the instructions.
Otherwise, you may damage the battery pack
and increase the risk of fire.
9.
Do not operate the backpack and attached tool
without all guards and other safety protective
devices in place and functioning properly on the
backpack and tool.
10.
When powering a tool with the backpack, refer
to the Operator's Manual for the attached tool
for additional personal protective equipment
requirements.
III. Operation
1.
Avoid dangerous environments—Do not use the
tool in rain or in damp or wet locations.
2.
Use the proper tool for your application—Using
the backpack or attached tool for purposes other
than their intended use could prove dangerous
to you and bystanders.
3.
Prevent unintentional starting—Ensure that the
switch is in the O
the backpack and handling the tool. Do not carry
the tool with your finger on the switch or energize
the tool with the switch in the O
4.
Operate the backpack and attached tool only in
daylight or good artificial light.
5.
Remove the battery pack from the backpack
and disconnect the tool before adjusting it or
changing accessories.
6.
Shut off the tool, remove the battery pack from
the backpack, and wait for all movement to stop
before adjusting, servicing, cleaning, or storing
the tool or backpack.
7.
Remove any battery pack(s) from the backpack
whenever you leave it unattended.
8.
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
9.
Do not overreach—Keep proper footing and
balance at all times, especially on slopes. Walk,
never run with the backpack.
position before connecting to
FF
position.
N
10.
Stay alert—Watch what you are doing and use
common sense when operating the backpack.
Do not use the backpack while ill, tired, or under
the influence of alcohol or drugs.
11.
Ensure that the ventilation openings are kept
clear of debris.
12.
Under abusive conditions, the battery pack may
eject liquid; avoid contact. If you accidently
come into contact with the liquid, flush with
water. If the liquid contacts your eyes, seek
medical help. Liquid ejected from the battery
pack may cause irritation or burns.
13.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
14.
CAUTION—A mistreated battery pack may
present a risk of fire, explosion, or chemical
burn.
Do not disassemble the battery pack.
Replace the battery pack with a genuine
Toro battery pack only; using another type of
battery pack may cause a fire or risk of injury.
Keep battery packs out of the reach of
children and in the original packaging until
you are ready to use them.
IV. Maintenance and Storage
1.
Maintain the backpack with care—Keep it clean
and in good repair for best performance and to
reduce the risk of injury. Follow the instructions
for lubricating and changing accessories. Keep
handles dry, clean, and free from oil and grease.
2.
When the battery pack is not in use, keep it
away from metal objects such as paper clips,
coins, keys, nails, and screws that can make a
connection from 1 terminal to another. Shorting
the battery terminals may cause burns or a fire.
3.
Keep your hands and feet away from moving
parts.
4.
Shut off the tool, remove the battery pack from
the backpack, and wait for all movement to stop
before adjusting, servicing, cleaning, or storing
the backpack or tool.
5.
Check the backpack for damaged parts—If there
are damaged guards or other parts, determine
whether it will operate properly. Check for
misaligned and binding moving parts, broken
parts, mounting, and any other condition that
may affect its operation. Unless indicated in the
instructions, have an Authorized Service Dealer
repair or replace a damaged guard or part.
4

Werbung

loading

Diese Anleitung auch für:

66205t