Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.2 Cleaning the impeller
If a lot of deposits collect in the intake housing,
the bottom part of the equipment must be dis-
mantled as follows:
•
Undo the three locking screws (Fig. 4/Item B)
and remove the intake cage.
•
Clean the impeller wheel with clear water.
•
Assemble in reverse order.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
GB
- 19 -
Werbung
