Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.1 Place of installation
The enclosed mounting material is designed for:
• Concrete C20/25
• Solid brick
• Aerated concrete
• Sand-lime brick
• Perforated brick
In the case of deviating or undefinable substra-
tes, other installation material must be used ac-
cordingly. In this case, it is essential to consult sui-
table specialist personnel on site.
1. Select a suitable installation site. The surface of
the installation site must be level and non-slip.
Important: Before drilling, check the selected
attachment point for hidden electrical, water,
gas or other lines.
Note: Observe the following tables for dimensions
A and B. These vary depending on the model.
300 x 160
500 x 160
Dimen-
sion
A
1575 mm
300 x 160
300 x 180
Dimen-
sion
300 x 200
B
max. 300 cm
►Follow the assembly steps shown, observing
the safety instructions, see „14. Assembly" on
page 35.
12
300 x 180
300 x 200
500 x 180
500 x 200
1775 mm
1975 mm
500 x 160
500 x 180
500 x 200
max. 500 cm
A
B
Werbung
