Reiner ChronoDater 920 Bedienungsanleitung Seite 45

ChronoDater 920/922/925
3. Maintenance
3.1. Commissioning, Ribbon Cassette
Inserting ribbon cassette  Fig.
Avoid skin contact with ribbon.
Swivel housing flap
f
Remove ribbon cassette
f
Remove ribbon cassette
f
Push ribbon cassette
f
Tension ribbon. For this, turn the red dial of the ribbon cassette in the direction of the
f
arrow to the right.
Re-attach the housing flap
f
3.2. Clean Device
CAUTION
Danger of electric shock when liquids enter into the device inside.
Pull the mains adapter from the socket and inform your specialist vendor
f
or the REINER Service.
NOTICE
Cleaning agents that are too aggressive may damage the housing surface.
Do not use any abrasives and plastic-dissolving cleaning agents for cleaning.
f
Clean the top cover of the device with a soft cloth if required.
f
For stronger contamination, moisten the cloth with water and mild detergent.
D
2
upwards and remove it.
8
at the grip strip.
8
from the packaging.
8
over the metal cover until it is flush.
2
.
GB
43