HIKMICRO CONDOR-Serie Schnellstartanleitung Seite 6

Mount Hand Strap
5.
Charge Device
6.
Note:
Please charge the device after the battery is installed in the battery compartment of the device.

The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).

Steps
1. Slide one end of the hand strap through the
attachment point.
2. Thread the hand strap through the hand strap
buckle, and fasten the hand strap to secure it.
3. Repeat above steps to finish mounting.
4. Adjust the tightness of the hand strap as needed.
Steps
1. Lift the type-C interface cover.
2. Connect the device and power adapter with a type-
C cable to charge the device.
4