Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter - 2
Fitting ....
Fig. 37
Position supplied sleeve 10x20x10mm between AC
Schnitzer front splitter and standard front skirt, right
and left as shown.
Fig. 38
Position the 5x20x17mm rubber spacer washer
supplied between the AC Schnitzer front splitter and
the standard front skirt, on the right and left as shown.
Fig. 39
Fix the AC Schnitzer front splitter with the 5x35mm
fixing screws supplied. For vehicles without standard
plastic lip, use M6x25mm and washers U6,4x18mm
in the area of the cavity fittings. In the area of the front
sleeve, use the pan-head screw M6x30mm and
washers U6,4x18mm.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
(G42) M-aerodynamic -
series
Fitting Instructions No: 5111 342 310 / Issue: 29.08.2022 / TSch
35
Werbung
