AC Schnitzer Front Splitter Montageanleitung Seite 30

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter - 2
Fitting ....
Fig. 22
Using the supplied 5x40mm hex bolts and U6,4x18mm
washers, screw the AC Schnitzer front splitter to the
standard front skirt using the AC Schnitzer center web.
Not applicable for vehicles without standard plastic
lip. (further Fig. 24)
Fig. 23
Drill a Ø 6mm hole at the front attachment point of the
AC Schnitzer centre web, through the standard front
skirt.
Fig. 24
For vehicles without a standard plastic lip, drill a Ø
6mm hole at both fixing points.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
(G42) M-aerodynamic -
series
Fitting Instructions No: 5111 342 310 / Issue: 29.08.2022 / TSch
30