Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G e n e r a l N o t e s !
AC Schnitzer Front Splitter - 2
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation ! These Fitting Instructions are intended solely for use by authorised AC
Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles who have the corre-
sponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
As manufacturer, we are obliged to point out that any changes you make to a vehicle licensed for use on public
roads require approval by a test centre and registration in the vehicle documents. As the legal regulations may vary
according to location, please contact the competent authorities for information.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
The AC Schnitzer front splitter is only fitted in conjunction with... BMW M- Aerodynamik SA-715
Fitting time (1 unit = 5 minutes)
The fitting time is 24 unit.
Tools Required
Masking tape
Various drill bits
Cordless drill or similar
Various Torx drivers
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
(G42) M-aerodynamic -
series
Fitting Instructions No: 5111 342 310 / Issue: 29.08.2022 / TSch
20
Werbung
