AC Schnitzer Front Splitter Montageanleitung Seite 34

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter - 2
Fitting ....
Fig. 34
Ready-mounted cavity fittings for vehicles without
standard plastic lip.
Fig. 35
Remove the middle series fastening clip.
Refit the AC Schnitzer front splitter as shown in
Figures 14 to 18.
Refit the AC Schnitzer centre web as shown in Figures
19 and 20.
Fig. 36
Using the supplied 5x40mm fixing screws, M6x45mm
pan-head screw and U6,4x18mm washers, screw the
AC Schnitzer front splitter to the front skirt by means
of the AC Schnitzer centre web.
On vehicles without a standard plastic lip, the
5x40mm fixing screw must be replaced with an
M6x40mm countersunk head screw and washers.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
(G42) M-aerodynamic -
series
Fitting Instructions No: 5111 342 310 / Issue: 29.08.2022 / TSch
34
M6x45mm
5x40mm
or
M6x40mm