Garmin EDGE 1040 Schnellstartanleitung Seite 5

specification of 7 lbf-in. (0.8 N-m).
You should check the tightness of the
screw periodically.
6 Align the tabs on the back of the Edge
device with the bike mount notches
.
7 Press down slightly and turn the Edge
device clockwise until it locks into
place.
Going for a Ride
If you are using a wireless sensor or
accessory, it can be paired and activated
during initial setup. If your device was
packaged with a wireless sensor, they are
already paired and can be activated
during initial setup.
Quick Start Manual
1 Hold to turn on the device.
2 Go outside, and wait while the device
locates satellites.
The satellite bars turn green when the
device is ready.
3 From the home screen, select
to view the biking profiles.
4 Select a biking profile.
5 Press to start the activity timer.
NOTE: History is recorded only while
the activity timer is running.
6 Swipe left or right to view additional
data screens.
You can swipe down from the top of
the data screens to view the widgets.
or
5