Geberit AquaClean Mera Comfort Montageanleitung Seite 51

Testing additional functions of the
Comfort design
Prerequisite
– When the detection range is entered: The
orientation light switches on.
1
Test lid lifting function for steady and low-
noise motion.
ü
When the detection range is entered: The
WC lid opens.
ü
When the detection range is left: The WC
lid closes after 2 minutes if no users are
detected during this time.
2
Test heating function of the WC seat.
ü
The WC seat steadily becomes
noticeably warm to the touch.
3
Test storage water heater status at the
lateral control panel.
ü
The LED lights up when you enter the
detection range.
ü
The LED switches off when you leave the
detection range.
9007201413054219-1 © 01-2017
966.729.00.0 (04)
Testing the lid lifting function of
the remote control
The lid lifter can be activated with the <Shower>
button.
4
Press the <Shower> button to activate the
lid lifter.
Result
ü
The WC lid opens fully. Pressing the <Shower>
button again closes the WC lid.
EN
51