Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Grill
You may press "
such functions: (the longest cooking time
is 60 minutes).
Pattern 1: 85% grill power, display G-1.
Example: cooking food with grill for 20
minutes
A)
Press "
" until the LED displayed
"G-1".
B)
Set cooking time "20:00"
C)
Press "
".
When grilling, the food isn't heated by
microwave, heat is radiated from the
metal heater at the top of the oven. When
grill is working, the cooking time has 2
stages, After the 1st half of the cooking,
the program will automatically pause and
sound 2 beeps, indicating you to open
the oven and turn food over, after turning
over, close the door, press "
the cooking will continue for the 2nd half.
If you do not want to turn the food over,
the oven will re-start after 1 min pause.
6. Combination Cooking
This appliance offers you a choice of two
methods of combination cooking.
Option 1: (55% Micro + 45% Grill),
display "C-1"
Option 2: (30% Micro + 70% Grill), display
"C-2"
Example: Cooking food using option 2 for
30 minutes.
a)
Press "
" button to select "C-2"
b)
Set cooking time for 30 minutes
c)
Press "
".
" button to select
" button,
7. Clock
The oven can be used as a clock.
Example: to input current time 16:30.
a)
Press "
flash in display. Rotate the "Time
setting" knob to set "16:00".
b)
Press "
setting" knob to set "16:30".
c)
Press "
is finished, the time start to go on
working.
8. Timer
The timer function helps the microwave
oven begin automatic cooking at set
time, and automatically stop operation
after finishing cooking. (You should set
the clock before using timer function).
Example: the current time of microwave
oven is 16:30, to set cooking at 18:15 on
70% power for 10 minutes.
a)
Press "
(same procedure as setting clock).
b)
Press "
c)
Input cooking time 10 minutes by
rotating the knob "Time Setting".
d)
Press "
If you don't set power and cooking time
(omit B and C steps), and directly press
"
" button, the microwave oven will work
only as a clock, there will be 10 beeps at
18:15, but no other function will run.
9. Child-safety lock
To activate the child safety lock, press "
" and "
" button at the same time for
2 seconds.
Press "
" and "
time for 2 seconds again, it will unlock this
function.
10. Pause/cancel
a)
In the course of operation, pressing "
" button will stop operation.
b)
If any program was set before
pressing start, pressing this button
will cancel all the set program.
12
EN
", the clock symbol will
" again, rotate the "Time
" again, the clock setting
" and set time to18:15
" to set 70% power.
".
" button, at the same
Werbung
