How To Use Cisco Connect; How To Access Cisco Connect; Main Menu - Cisco Linksys X3000 Benutzerhandbuch

Linksys X2000/X3000
3. Connect one end of the power adapter cord to the Power port and the
other end to the electrical outlet .
4. Power on the computer that you will use to configure the modem-router .
5. The LEDs for Power, Wireless, and Ethernet (one for each connected
computer) should light up . If not, make sure the modem-router is
powered on and the cables are securely connected .
NOTE FOR USERS IN NEW ZEALAND
To set up the device, follow these instructions:
1. Access the Setup > Basic Setup screen .
2. Select RFC 2364 PPPoA from the Encapsulation drop-down menu .
3. For the Virtual Circuit ID, enter 0 for the VPI and 100 for the VCI .
4. Select VC for Multiplexing .
5. Select Multimode from the DSL Modulation drop-down menu .
6. Enter your User Name and Password details from your ISP .
7. Click Save Settings .

How to use Cisco Connect

Cisco Connect provides an easy way to manage your router and network . You
can connect computers or devices to your router, give Internet access to guests
in your home, and change the router's settings .

How to access Cisco Connect

Windows
Go to Start > All Programs > Cisco Connect .
Mac
Go to Go > Applications > Cisco Connect .

Main Menu

When Cisco Connect starts up, the main menu appears and offers four options:
Computers and Devices, Parental Controls, Guest Access, and Router Settings .
How to use Cisco Connect
9