Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 ENGLISH
1-1
Introduction
1-1-1
Notice
This manual is part of the scope of delivery of your R88L-EA-AF linear axis.
OMRON EUROPE B.V. products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Always heed the informa-
tion provided with them. Failure to heed precautions can result in injury or damage to property.
All technical information written or described within this manual is believed to be accurate as of the date of the pub-
lication. OMRON EUROPE B.V. gives no warranty for the product specifications stated in this manual.
1-1-2
Safety Information
Please read each section in its entirety and make sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations described.
Furthermore the R88L-EA-AF linear axis series must comply with the local rules, regulations, preventive accident
and environmental protection measures, in force in the country of installation.
Please contact OMRON EUROPE B.V. or authorized distributors in case of missing information or any unclear
installation procedures, safety or other issues.
Intended audience
This manual is intended for personnel with knowledge of electrical and mechanical systems who are responsible
for the design, installation and management of factory automation systems and facilities.
1-1-3
General Precautions
The user must operate the product according to the performance specifications described in this manual. Before
using the product under conditions which are not described in the manual or applying the product to nuclear control
systems, railroad systems, aviation systems, vehicles, safety equipment, petrochemical plants, or other systems,
machines and equipment that can cause serious injury or damage to life, limb and property if used improperly, con-
sult your OMRON representative.
Safety precautions
The magnet plates show large attraction forces on all soft magnetic objects such as iron.
These forces cannot be controlled by hand. They may cause serious jamming danger. Do
not bring any soft magnetic objects (iron) nearer than 25 cm of the magnetic side of the
magnet plate.
Be sure that the magnetic plates are fixed into your machine before removing the magnetic
field protection plates. Put the magnetic field protection plates on the magnetic plates again
before dismounting them.
Magnetic sensitive objects like banking cards, pacemakers or other magnetic information
carriers may be damaged if they are brought within 1 m of the magnet plates.
1 - 2
Accurax Linear Axis Installation Manual
Werbung
