Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 ENGLISH
Please, follow the next steps:
• Remove the cover of the slider. Remove the three M3 screws on each side from each front plate on the left and
right hand side of the slider.
• Sliders with a very short stroke, it may be necessary to also disassemble the mounting plate before you are able
to remove the cover.
• You can use the same pattern inside the slider to attach/detach all the aluminum bars as you use to install the
slider in your machine frame.
• Now assemble the slider with the cover and if possible wrap it in the transportation foil again in order to store for
a lengthy period before installation in the machine.
1 - 6
Accurax Linear Axis Installation Manual
Werbung
