Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1-6-5
Installing the Linear Axis in the System
Each linear axis is shipped in a wooden box. To prevent the product from being damaged during shipping, the
product is locked.
"Locked" means that the slider is clamped to one of the end plates by means of a red screw.
For the mounting process it is necessary to tighten all the mounting screws to the specified
torque in order to ensure accuracy and a long lifetime of the product.
Please refer to the below pictures in order to understand the mounting process:
This is the linear axis as it comes out of the box.
The shipping lock is an M4x25 screw.
Remove the lock in order to proceed with the mounting process.
Accurax Linear Axis Installation Manual
1 ENGLISH
1
1 - 25
Werbung
