Toro Flex-Force Power System 60V MAX Bedienungsanleitung Seite 9

II. Preparation
1. Use appliances only with specifically designated battery packs.
Using other types of battery packs may create a risk of injury and/or
fire.
2. Do not use a damaged or modified battery pack or battery charger.
It may exhibit unpredictable behavior, resulting in fire, explosion,
or risk of injury.
3. If the supply cord to the battery charger is damaged, contact an
Authorized Service Dealer or distributor to replace it.
III. Operation
1. Charge the battery pack with only the battery charger specified by
the tool manufacturer. A charger suitable for 1 type of battery pack
may create a risk of fire when used with another battery pack.
2. Charge the battery pack in a well-ventilated area only.
3. Follow all charging instructions and do not charge the battery pack
outside of the temperature range specified in the instructions.
Otherwise, you may damage the battery pack and increase the risk
of fire.
4. Under abusive conditions, the battery pack may eject liquid; avoid
contact. If you accidently come into contact with the liquid, flush with
water. If the liquid contacts your eyes, seek medical help. Liquid
ejected from the battery pack may cause irritation or burns.
5. Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130°C (265°F) may cause
explosion.
6. CAUTION—A mistreated battery pack may present a risk of fire,
explosion, or chemical burn.
•
Do not disassemble the battery pack.
•
Replace the battery pack with a genuine Flex-Force battery pack
only; using another type of battery pack may cause a fire or risk
of injury.
•
Keep battery packs out of the reach of children and in the original
packaging until you are ready to use them.
7