Toro Flex-Force Power System 60V MAX Bedienungsanleitung Seite 19

Preparing the Battery Pack for Recycling
Important:
Upon removal, cover the terminals of the battery
pack with heavy-duty adhesive tape. Do not attempt to destroy or
disassemble the battery pack or remove any of its components.
Contact your local municipality or your authorized Authorized Service
Dealer or distributor for more information on how to responsibly recycle
the battery.
Troubleshooting
Perform only the steps described in these instructions. All further
inspection, maintenance, and repair work must be performed by an
authorized service center or a similarly qualified specialist if you cannot
solve the problem yourself.
Problem
The battery pack loses
charge quickly.
The battery charger is not
working.
Lithium-ion battery packs labeled with the Call2Recycle seal
can be recycled at any participating retailer or battery recycling
facility in the Call2Recycle program (US and Canada only). To
locate a participating retailer or facility closest to you, please
call 1-800-822-8837 or visit www.call2recycle.org. If you
cannot locate a participating retailer or facility nearby, or if your
rechargeable battery is not labeled with the Call2Recycle seal,
please contact your local municipality for more information on
how to responsibly recycle the battery. If you are located outside
of the US and Canada, please contact your Authorized Service
Dealer or distributor.
Possible Cause
1. The battery pack is over
or under the appropriate
temperature range.
1. The battery charger
is over or under
the appropriate
temperature range.
2. The outlet that the
battery charger is
plugged into does not
have power.
17
Corrective Action
1. Move the battery pack
to a place where it is
dry and the temperature
is between 5°C (41°F)
and 40°C (104°F).
1. Unplug the battery
charger and move it to
a place where it is dry
and the temperature
is between 5°C (41°F)
and 40°C (104°F).
2. Contact your licensed
electrician to repair the
outlet.