Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3 Adjusting the Settings
Customize the video recording and other general settings via the on-screen
display (OSD) menus:
If the dash cam is recording, press the 'OK' button (6) to stop and enter
Standby Mode.
1. Press the 'Menu' button (3) to enter the Settings menu.
2. Press the 'Up' and 'Down' buttons (4&5) to select a menu option and press
the 'OK' button (6) to enter the selected menu.
3. Press the 'Up' and 'Down' buttons (4&5) to select the desired setting and
press the 'OK' button (6) to confirm the setting.
4. From the Settings menu, press the 'Menu' button (3) to exit the menu.
3.4 Adjust the Recording Resolution
The resolutions can be adjusted in the general settings.
The Z3D dash cam supports 1440P and 1080P for front cam recording and
1080P for rear cam recording.
The rear cam options will only be shown when the rear cam is connected to
the front cam.
Front Cam only:
Settings > Resolution > 1440P / 1080P
Front and Rear Cam Connected:
Settings > Resolution > 1440P+1080P / 1080P+1080P
3.5 Loop Recording
Videos are recorded and saved to the memory card in set intervals. Once the
memory card is full, Loop Recording automatically overwrites the earliest
unprotected saved file. This prevents long duration video clips from being
lost in a single overwrite. Video files can be saved to the memory card in 1, 3
or 5 minute intervals:
Settings > Loop Recording > 1 Min / 3 Mins / 5 Mins
-12-
Werbung
