Z-EDGE Z3D Bedienungsanleitung Seite 20

4. Press the 'Up' and 'Down' buttons (4&5) to choose the file to preview and
'OK' button (6) to select.
5. Press the 'Menu' button (3) to return / pause the preview.
6. Press the 'Menu' button (3) again to return to the Playback menu.
3.25 Deleting Video & Photo Files
1. Go to the Playback menu (see 3.24).
2. Navigate to the file you wish to manage and press the 'OK' button (6) to select.
3. Press the 'OK' button (6) to delete the file.
4. Press the 'Up' and 'Down' buttons (4&5) to select between Yes and No.
5. Use the 'OK' button (6) to confirm your choice.
6. Press the 'Menu' button (3) to return to the Playback menu.
3.26 Managing Video & Photo Files
Connecting to Computer
Connect the dash cam to a computer using the included shorter Micro-USB
data cable. The dash cam will automatically power on and a USB icon will be
displayed on the dash cam screen.
The contents of the Micro SD card will appear as a regular disk drive on your
computer as if it were a USB flash drive. Browse as normal to view, play, copy
and delete saved files.
Recorded videos and photo files are sorted into different folders:
• Z-EDGE Z3D > Event: Emergency videos automatically protected by Collision
detection, Parking Mode or manually.
• Z-EDGE Z3D > Normal: Normal videos.
• Z-EDGE Z3D > Photo: Snapshots.
Recorded video and photo files are saved using the following naming rules:
• Date + Time + Index + F / R
Note:
• F means front-view file, R means rear-view file.
-17-