Silvercrest SMW 800 A2 Bedienungsanleitung Seite 12

Selecting the operation level
Press the button Operation r
•
priate number of times to set the required power
level.
• 1x for 800 Watts of power (P800).
• 2x for 700 Watts of power (P700).
• 3x for 600 Watts of power (P600).
• 4x for 500 Watts of power (P500).
• 5x for 400 Watts of power (P400).
• 6x for 300 Watts of power (P300).
• 7x for 200 Watts of power (P200).
• 8x for 100 Watts of power (P100).
The power setting level is indicated in the display 1
(e.g. P800 at 800 Watts of power).
Programming the cooking time
After you have selected the power level, programme
in the desired cooking time:
Turn the control dial q, until the desired cooking
•
time has been programmed in.
The increments for setting the time with the control
dial q are as follows:
• from 10 sec. to 5 min: in 10 second increments
• from 5 to 10 min: in 30 second increments
• from 10 to 30 min: in 1 minute increments
• from 30 to 95 min: in 5 minute increments
Aborting/stopping an input process
Press the button Stop 0
input of data. The appliance reverts to standby mode.
Starting the cooking process
When you have programmed in the power level
and the cooking time, and the symbol
the display 1, you can start the cooking process:
To start the cooking process, press button Start/
Quickstart q .In the display 1 appear the
symbols for microwave operation
(Power P100 - P400) or
P800).
The programmed time starts to count down.
the appro-
once to cancel or end
blinks in
and cooking
(Power P500 -
Interrupting the cooking process
Press the button Stop 0
process . The appliance interrupts the cooking process
and stops the remaining time. Press the button
Start/Quick start q
cess.
Abort the cooking process
Press the button Stop 0
process. The appliance reverts to standby mode.
Cooking process is finished
When a cooking process is complete, "End" appears
in the display 1 and 4 signal tones sound. If the
door of the microwave is not opened, the signal
tones sound again after about 2 minutes.
Quick start
With this function you can immediately begin cooking
at 800W power for 30 seconds (or longer, up to
12 minutes).
Press the button Start/Quick Start q
•
In the display 1 appear the symbols for micro-
wave operation
as ":30". The microwave starts the cooking pro-
cess for 30 seconds. The count down begins.
Should you wish to cook for a longer period, re-
peatedly press the button Start/Quickstart q
until the desired time is reached.
- 10 -
once to interrupt a cooking
to continue the cooking pro-
twice to stop the cooking
once.
and cooking , as well