Further Information - Eneo TVB-2080Z03IR Bedienungsanleitung

DAY/NIGHT
PICT ADJUST
SPECIAL
SYSTEM
EXIT

Further information

The manual is also available from the eneo web site at www.eneo-security.com.
Sets DAY / NIGHT to EXT, AUTO, COLOR and B/W. SMART IR can be set to reduce the
saturation by the strong IR illumination in the night in any menu of EXT, AUTO and
B/W(NIGHT) Setting SMART IR in any menu is identically applied to other menu.
Zero(0) turns off SMART IR and High setting avoids the saturation strongly but the
corners will be darker accordingly. IR LED Control(AUTO/OFF) is available with IR
LED model only. If IR LED is set to OFF, IR LED will be turned OFF but DAY or NIGHT
is still determined by the built-in light photo sensor.
EXT – DAY or NIGHT is determined by the built-in light photo sensor. Camera
with IR LED must be set to EXT.
AUTO – Used when DAY or NIGHT is determined by light level through the
EXT or AUTO
lens and DAY from/to NIGHT is switched automatically by the scene brightness.
D<-->N THRESHOLD, D<->N DELY and SMART IR can be set in the menu. When
EXPOSURE>AGC is less than 12, DAY/NIGHT AUTO is disabled and forcibly switches
to ___(DAY) to avoid the malfunction. EXT, B/W(NIGHT) and COLOR(DAY) is
independent on AGC level. When EXTERNAL IR LED is used with NON IR LED model,
please set to IR LED MODE ON.
B/W(NIGHT) – Forcibly removes IR cut filter and switches to B/W regardless
of light level.
COLOR(DAY) – Forcibly DAY/NIGHT is disabled and outputs color video..
Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAMMA
Sets MIRROR/FLIP, PRIVACY, MOTION, PIXEL DEFECT, TITLE SET, DISPLAY, DEFOG,
POINTING ZOOM, PRESET ZOOM
Sets TV SYSTEM, RESOLUTION, COMM.SETUP, UTC CONTROL, LANGUAGE, OUTPUT
SELECT and FACTORY DEFAULT
SAVE & EXIT – Exits the menu after saving the parameters. EXIT – Exits the menu
without saving the menu.
EN
13