Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MODE
Press MODE to change the set value of humidity as follows: LIVING
SPACE 50% / BASEMENT 45% / CONINUOUS 55%. The corresponding
indicator light will turn on. If you select CONTINUOUS, the display will
show [CO].
TIMER
•
Power off state: Press the timer key to activate the power on
timer. The timer light turns on and the display initially shows
[0.5]. Use the UP and DOWN keys to set the time. The time display
remains on as long as the timer function is active. To cancel the
timer function during runtime, press the timer key again.
•
Power On: While the dehumidifier is running, press the Timer key
to set the power off timer. The display will show [0.5]. Use the UP
and DOWN keys to set the time.
•
Time measurement range: The adjustable time ranges from 0.5
hours to 24 hours.
•
Lock function: Press and hold the timer button for 3-5 seconds
to activate the lock function. The lock light will illuminate and the
other keys will become inactive. Press the timer key again for 3-5
seconds to cancel the lock function. After the lock light goes out,
the other keys become active again.
MIRAGE (only available in white models
Press the MIRAGE key to activate the front panel display. Press the key
again to deactivate the display on the front panel. The indication on the
front panel display matches the indication on the upper display.
FILTER
After the dehumidifier has been running for 250 hours, the filter screen
cleaning indicator light will illuminate, reminding you that the filter
screen needs to be cleaned. Turn off the unit and clean the filter as
described in the chapter CLEANING AND CARE.
Note for activating the WiFi function (only for WiFi models):
Press the TIMER button and MODE button simultaneously for 3-5 seconds when
the power is off to activate the WiFi function.
EN
27
Werbung
