EuroLite IP AUDIENCE BLINDER 2x100W LED COB RGB+WW Bedienungsanleitung Seite 26

12-Channel-Mode
Channel
1
Master Dimmer
2
Strobe
3
Programs
4
Program Speed
5
Dimmer Red 1
6
Dimmer Green 1
7
Dimmer Blue 1
8
Dimmer White 1
9
Dimmer Red 2
10
Dimmer Green 2
11
Dimmer Blue 2
12
Dimmer White 2
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Value
000 – 255 Total brightness 0-100%
000 – 010 No function
011 – 255 Strobe effect with increasing speed 0-100%
000 – 005 No function
006 – 100 Program 1: Color change
101 – 200 Program 2: Color fade
201 – 255 Program 3: Color pulse
000 – 255 Increasing speed 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
000 – 255 Increasing brightness 0-100%
Function
26/28 00148383, Version 1.0