QCY G1 Benutzerhandbuch Seite 6

LED on Case
LED will glow solid red when case is charging and glow solid green once it is topped up.
Instruction
Button on case
Power-on: keep touching the panel for 1.5s
Power-off: Push earbud back in case.
Answer/end call: double touch the panel
Ignore call: keep touching the panel for 1.5s
Skip track backward: keep touching left panel for 1.5s
Skip track forward: keep touching right panel for 1.5s
Voice assistant: triple touch left panel
Playback/pause: double touch the panel
Gaming mode: triple touch right panel
Tips
1. Before using the earbuds, please read the manual carefully and keep it for future
references.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds are left unused for over two weeks, please recharge.
4. Please use the chargers made by qualified manufacturer.
5. If the earbuds cannot be found by your phone, please check whether they are in
pairing mode; if left unconnected for a long while, the earbuds will exit pairing
mode, please re-enter the mode; if a procedure error of your phone occurs,
reboot it; if a procedure error of the earbuds occurs, reboot or reset it.
LED
6
Touch panels
LED