Electrical Safety; Operating Elements - SCANCOOL DA 320 X Bedienungsanleitung

Electrical safety

1. Ensure the rated voltage shown on the
rating label corresponds with the voltage
of the power supply.
2. Do not operate any appliance with a
damaged power cord or plug when the
appliance malfunctions or has been dam-
aged in any manner.
3. Protect the power cord against damages.
Do not let it hang over sharp edges, do
not squeeze or bend it. Keep the power
cord away from hot surfaces and open
flames and ensure that nobody can trip
over it.
4. Do not open the housing under any cir-
cumstances. Do not insert fingers or for-
eign objects in any opening of the appli-
ance and do not obstruct the air vents.
5. Protect the appliance against heat. Do
not place close to open flames or heat
sources such as stoves or heating appli-
ances.
3. Operations

Operating elements

Press to increase temperature and humidity. Keep
pressed for approx. 5 seconds to turn UVC (ultraviolet
light) on and off.
Press to reduce temperature and humidity. Keep
pressed for approx. 2 seconds to defrost manually
(After use).
Press to display temperature setting. Press to confirm temperature setting after selecting
with up and down buttons.
Press to display humidity setting. Press to confirm humidity setting after selecting with up
and down buttons.
Press to turn LED light on and off.
Press to turn appliance on.
Keep pressed for approx. 5 seconds to turn appliance off.
Keep both buttons pressed for ap-
prox.3 seconds to activate/deacti-
vate the button lock. With button
lock activated, only LED light and
UVC can be turned on and off.