Siemens SITRANS TK Bedienungsanleitung Seite 44

7NG3120, 7NG3121, 7NG3122
2 Installation
2.1 Installation in the terminal housing
The SITRANS TK/TK-H transmitter must be installed in the housing. The housing's
type of protection and material must be adapted to the respective requirements.
The environmental conditions specified in the technical data (Chapter 1.4, page 37)
must be observed.
Springs and screws for securing the transmitter are included in the delivery. The
SITRANS TK/TK-H can be secured both in the base of the terminal housing and
also in its raised cover.
Connection base
Figure 3 Securing the SITRANS TK/TK-H transmitter in the cover of the terminal housing
Figure 4 Securing the SITRANS TK/TK-H transmitter in the base of the terminal housing
44
T r
a n s
m i
t t e
Transmitter
r
Instruction Manual
SITRANS TK/TK-H
C79000-B7174-C12-07