urmet 1099/214B Schnellanleitung Seite 9

ENGLISH
1 WARNINGS
Precautions
➢
Make sure that the device is intact after removing it from the package.
➢
Disconnect the device from the mains before cleaning or maintenance. Do not use spray
products to clean the device.
➢
Check that the working temperature is within the indicated range and that the environment is
not particularly humid.
➢
Disconnect power by means of the circuit breaker in the event of a failure and/or bad
operation.
➢
The device can only be opened by qualified technical personnel.
➢
Exclusively contact an authorised service centre for repairs.
Installation specifications
➢
Arrange a suitable circuit breaker and fuse upstream of the devices.
➢
Make sure that the rating plate data correspond to the power specifications before connecting
the device to the mains.
Installation precautions
➢
There are particular environments (such as seashores, harbours, wharves, etc.) that can
accelerate corrosion of external parts. Also installation in very dusty environments (quarries,
mines, dusty materials, etc.) can compromise the optimal operation.
➢
To prevent device overheating, place it in a well aired position.
➢
For the same reason, the device must not be installed near heat sources as radiators or
warm air ducts, in places where it is directly exposed to sun irradiation or in rooms with
excessive dust accumulation, subject to mechanical vibrations or impacts.
➢
Consider the device operating temperature range before choosing the place for installation.
Do not install the unit over another heating device.
➢
Do not power the device on immediately after moving it from a cold place to a warm one and
vice versa. As a general rule, wait for three hours: the device needs this time to adapt to a
new environment (temperature, humidity, etc.).
Video recording
➢
This device is not designed as a burglar system but mainly to transmit and record video
images. URMET S.p.A. is not in any way responsible for loss or damages of the user
consequent to theft.
➢
Before using the device, record a demo video to verify the correct functionality of this feature.
URMET S.p.A. is not in any way responsible for loss of recorded data consequent to wrong
setting or usage, device misfunctioning or failure.
➢
This device is composed by electronic precision components. Do not hit the device while
recording as it might affect the video.
Privacy and Copyright
➢
The IP camera is designed for surveillance systems. Video recording is subject to the laws
applicable to the Country where used. It is forbidden to record images with Copyright.
➢
The User is responsible to check and respect all local laws and norms for video signal
recording. The manufacturer is NOT in any way liable for any usage of the product which
might result not compliant to the relevant norms.
9