Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Firmware upgrade
➢
Periodically check the Urmet website in the product-specific section for software and/or
firmware
VIDEOSURVEILLANCE", type the reference product code in the search field and move to
DOCUMENTATION AND RESOURCES).
Network configuration
➢
Camera default setting is DHCP mode. If the network does not support dynamic addressing
(DHCP), the device will automatically switch to factory IP 192.168.1.168. Use Urmet "Easy
Tool" software to modify the IP address and other network settings to prevent any conflict
with other devices on the network.
Network connections
➢
When connecting a PC (using Software Client or Browser), any video channel on the PC will
be using "unicast" connection (TCP, RTP, UDP).
The device can support a limited number of "unicast" connections so it is possible to show
➢
the video on maximum 4 remote devices (of which 2 smartphones at the most) at the same
time depending on the available network band.
Reset button
➢
Press for at least 3 seconds: the camera is completely reset and goes back to default
settings.
IMPORTANT NOTE: the camera loses network configuration and the WiFi interface returns
to Access Point mode.
10
updates
(go
to
www.urmet.com
in
the
Products
section
"CCTV-
DS1099-148B
Werbung
