Adam Equipment AE 402 Bedienungsanleitung Seite 25

• Press [Print/M+/Esc] to return to the group "FUnC 2". If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
Parameter Description
P1 PCt
This parameter allows the
user to enter the Percent
weighing
Section 6.7.
P2 AnL
Enter the Animal Weighing
mode of operation, See
section 6.8
7.3 RS-232 PARAMETERS
• Press [Z/T] to enter a parameter. Use the [Unit/] key and [Pcs/] key to
set the values or just the [Pcs/] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/] key.
• Press [Print/M+/Esc] to return to the group "FUnC 3". If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
This group of parameters can be set by the user for setting the RS-232 active or not,
baud rate, printing mode, accumulation mode, RS-232 language, and user or scale ID
numbers.
Parameter Description
C1 on
Enable or disable the
RS-232 interface
C2 bd
Baud Rate
Function. See
Options
Prt on
Prt oFF
600
1200
2400
4800
9600
19200
Options
None
Set the filter value.
Default
or setting
Prt on
9600
© Adam Equipment Company 2010
Default
setting
Enabled
always
Enabled
Always
Values