Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.8
ANIMAL (D
YNAMIC
The scale can be set to animal (dynamic) weighing for weighing any items that are
unstable or may move. See Section 7.4.
The scale will use a special filter to minimise the effects of any movement while the
moving animal or unstable samples are on the scale.
• Press [Func/C]. The first option is "FunC 1", press the [Func/C] key again to
display "Func 2".
• Press the [Z/T] key. "F2 PCt" will be displayed. Press the [Pcs/] key to
advance to the second function, "P2 AnL", Animal weighing.
• Press [Z/T] to enter animal weighing. The scale will change to animal weighing
and allow weighing of an unstable animal or sample on the platform.
• To use the Animal Weighing function it is necessary to set the amount of
filtering required for the item to be weighed.
require a higher level of filtering to give a stable result. The display will show
"Flt x" where x is a value from 1 to 5. The higher the value the greater the
amount of filter will be. To increment the value shown press the [Pcs/] key
then press the [Z/T] key to accept it.
• The display will flash "Ani " 2 times then show the current weight, 0.00. The
scale is now ready to weigh.
) WEIGHING
More active animals will
© Adam Equipment Company 2010
Werbung
