Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.8.1 ANIMAL WEIGHING PROCEDURE
• With the platform empty the display will show zero weight. Place containers
or blankets onto the platform and press the [Z/T] key to zero the display. The
scale may go into the animal (dynamic) weighing procedure when the items
are placed on the scale but will return to showing zero when the [Z/T] key is
pressed.
• Place the animal or sample to be weighed on the platform.
• The display will show the Animal/Dynamic weighing symbol
weight is determined. The time it takes for the stable value will depend upon
the setting of the filter parameter in the first step.
• When a stable reading is found, the display will show this value, and the
display will be locked until the [Z/T] key is pressed. The display will show the
"Hold" symbol while the display is locked.
• To weigh a second subject press the [Z/T] key if necessary to zero the display,
and place the next animal on the scale. The scale will detect the new weight
and hold it as before.
• The scale will remain in the animal weighing mode until the [Unit/] key is
pressed. Then it will return to normal weighing.
© Adam Equipment Company 2010
until a stable
Werbung
