cecotec BOLERO AGUAZERO 4201 E Bedienungsanleitung Seite 96

ENGLISH
The
detergent Detergent residue
dispenser clogs the oil seal.
lid cannot
be closed
properly
There is
detergent The dishes block
in the the detergent
dispenser dispenser.
Steam is This phenomenon
formed is normal.
There are Aluminium items
black or grey have brushed
marks on the against the
tableware tableware.
There is
standing This is normal.
water at
the bottom
of the
dishwasher.
Dispenser
The overfilling or rinse
dishwasher aid spillage.
has a leak
Dishwasher is not
level.
Please note.
If none of these situations match your problem, do not attempt to disassemble, or repair
the appliance by yourself. Repairs carried out by unqualified persons may result in injury or
serious malfunctions. Contact the official Cecotec Technical Support Service. The repair must
be carried out by an authorised technician, and you must use only original spare parts.
BOLERO AGUAZERO 4201 E _4201 INOX E
96
Clean detergent residues adhering to the inside of the
dispenser.
Load the dishes again correctly.
During drying and draining of the water, some steam
escapes from the ventilation grille next to the door
locking system.
Use a specific mild cleaner to remove these marks.
A small amount of clean water around the outlet
at the bottom of the dishwasher keeps the seal
lubricated.
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause excessive foaming and
lead to overflow. Wipe any spills with a damp cloth.
Make sure that the dishwasher is level.