cecotec BOLERO AGUAZERO 4201 E Bedienungsanleitung Seite 93

If the cables are properly connected.
-
If there is power at the electrical outlet.
-
If the inlet and drain hoses are screwed on and secured.
-
All packaging and printed material must be removed from the dishwasher.
-
Warning:
After installation, keep this manual. The content of this manual is very useful for users.
8. TROUBLESHOOTING
Error code
When some faults occur, the appliance displays error codes to warn you.
Codes
E1
E2
E3
E4
E5
E6
E7
WARNING!
If an overflow occurs, turn off the main water supply before calling the official Cecotec
Technical Support Service. If there is water in the base due to overfilling or a small leak, the
water must be removed before restarting the dishwasher.
Before calling technical support service
The following tables may save you from having to contact technical support.
Problem
Door open
Water inlet
Water drainage
Temperature sensor
Overflow/leakage
Water leakage
Heating element
BOLERO AGUAZERO 4201 E _4201 INOX E
Possible causes
The door is open when the dishwasher is
in operation.
Failure in the water inlet system.
Incorrectly installed or clogged water inlet
hose.
Failure of the water drainage system.
Incorrectly installed or clogged drain hose.
Failure of the temperature sensor.
Overflow/leakage of water occurs.
Water leakage occurs.
Abnormal heating.
ENGLISH
93