Safety Instructions - LD Systems DIO 22 Bedienungsanleitung

This symbol indicates hazards that can cause an electric shock.
This symbol indicates danger spots or dangerous situations.
This symbol indicates danger from hot surfaces.
This symbol indicates danger from high volumes.
This symbol indicates supplementary information on the operation of the product.
This symbol denotes a device that does not contain any user-serviceable parts.
This symbol indicates a device that may only be used in dry rooms.

SAFETY INSTRUCTIONS

DANGER:
1. Do not open or modify the device.
2. If your device is no longer working properly, liquids or objects have gotten inside the
device, or the device has been damaged in any other way, switch it off immediately
and disconnect it from the power supply. This device may only be repaired by
authorized specialist personnel.
3. For devices of protection class 1, the protective conductor must be connected
correctly. Never interrupt the protective conductor. Protection class 2 devices do
not have a protective conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be put into operation if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the power cord of the device is damaged, the device must not be put into operation.
4. Permanently connected power cords may only be replaced by a qualified person.
5